RULE OF THUMB

Use 8’’W material inside building.

Use 12’’W material outside building.

For best seal, when possible, install PVC Strip Doors, One foot wider and one foot higher than clear opening. By going one foot higher, loads and people will pass through easier.

When choosing overlap consider the height of the PVC Strip Door. The higher you go the more overlap is required for a good seal.

When choosing hardware, select Universal or HD Aluminium for all industrial applications. For Residential, Commercial use, medium duty plastic can be utilized to save money. All hardware has a lifetime warranty.

After install, cut strips so they don’t touch the ground. 2 weeks later, go back and make the final cut. Some will have stretched. Never let the PVC Strip touch the floor. Keep approximately 1/2’’ from floor. This allows the door to work as designed.

Number of Strips Needed

WIDTH OF OPENING IN FEET
3′4′5′6′7′8′9′10′11′12′13′14′15′16′17′18′19′
MATERIAL

WIDTH

6″ Material
50% Ovrlap(2″)
912151821242730333639424548515457
6″ Material
100% Ovrlap
1115192327313539434751555963677175
8″ Material
100% Ovrlap(2″)
68101214161820222426283031343638
8″ Material
100% Ovrlap
811141720232629323538414447505356
12″ Material
66% Ovrlap(4″)
910121315161819212224252728
12″ Material
100% Ovrlap
1113151719212325272931323537
16″ Material
75% Ovrlap(6″)
91112131415171819202123
16″ Material
100% Ovrlap
111314161719202223252628

EXAMPLE – INDUSTRIAL COOLER

1 – Cooler with a clear opening of 8’W x 8’H

RULE OF THUMB – Go 1’W and 1’H, overall size 9’W x 9’H

At 9’ overall height, we recommend a 100% overlap.

For this example, the chart above reads you need 26 strips – 8’’W.

1 – Bulk roll 8’’W x 150’ will create 16 strips – 9’L ( 150’L / 9’L = 16.66 )

COMPONENTS REQUIRED FOR COMPLETE DOOR

5 – 2’L HD Aluminium Hardware @18 = 90

2 – Bulk roll STD Ribbed 8’’ x 150’ Perfolated @9’L @136 = 272

Ex. 1-9’W X 9’H PVC Strip door utilizing 8’’ Ribbed 100% overlap – HD Aluminium